Categories
- AAMI
- AASHTO
- AATCC
- ADS
- AGA
- ANS
- ANSI
- API
- ASABE
- ASD-STAN
- ASHRAE
- ASIS
- ASME
- ASSE
- ASTM
- AWPA
- AWS
- B11-STD
- BIFMA
- BSI
- CGA-GAS
- CGSB
- CLSI
- CRSI
- CTA
- EEMUA
- FCI
- HEI
- HI-HYDRAUL
- HI-HYDRON
- IADC
- IAPMO
- ICC
- IEC
- IEEE
- IEST
- IMO
- IPC
- ISA
- ISPE
- JEDEC
- JSA
- NACE
- NBBI
- NEMA
- NETA
- NRC
- NSF
- PIP
- SAE
- SAE-ITC
- SAI
- SAIA
- SMACNA
- SMPTE
- SN
- SNZ
- TAPPI
- ULC
- UOP
FCI 73-1
Revision:98th Edition, 2003 Published Date:January 2003 Status:Active, Most Current Document Language: Published By:Fluid Controls Institute (FCI) Page Count:9 ANSI Approved:No DoD Adopted:No
This standard provides the minimum requirements for the design,fabrication, pressure rating, marking and testing of pressurecontaining housings for "Y" Type Strainers for use with pipeconforming to dimensions specified in ANSI B 36.10 and ANSI B36.19.
Certain standards and specifications are specificallyincorporated by reference into this standard. However, it is notconsidered practical to refer to a dated issue of each standard orspecification referenced, and for the purpose of this standard itis intended that the latest revision considered in effect by theissuing authority be used.
This standard provides the minimum requirements for the design,fabrication, pressure rating, marking and testing of pressurecontaining housings for "Y" Type Strainers for use with pipeconforming to dimensions specified in ANSI B 36.10 and ANSI B36.19.
Certain standards and specifications are specificallyincorporated by reference into this standard. However, it is notconsidered practical to refer to a dated issue of each standard orspecification referenced, and for the purpose of this standard itis intended that the latest revision considered in effect by theissuing authority be used.